ViewSonic CDP4262-L Car Video System User Manual


 
7
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power on/off.
3
IR IN /
4
IR OUT (3.5 mm)
IR signal output/input for the loop-through function.
NOTES:
This display’s remote
control sensor will stop
working if the jack [IR IN] is connected.
To remotely control your A/V device via this
display, refer to page 14 for IR Pass Through
connection.
5
RS232C OUT
RS232C network output for the loop-through
function.
6
RS232C IN
RS232C network input for the loop-through function.
7
RJ-45
LAN port connection from your OPS device.
8
HDMI IN
HDMI video/audio input.
9
DisplayPort
DisplayPort video input.
10
DVI IN
DVI-D video input.
11
DVI OUT / VGA OUT
DVI or VGA video output.
12
VGA IN (D-Sub)
VGA video input.
13
VGA AUDIO IN
Audio input for VGA source (3.5mm stereo phone).
14
COMPONENT IN (BNC)
Component YPbPr video source input.
15
SPEAKER SWITCH
Internal speaker on/off switch (CDP4260-L/
CDP4262-L/CDP5560-L/CDP5562-L).
External speaker on/off switch (CDX4652-L).
16
AUDIO IN
Audio input from external AV device (RCA).
17
AUDIO OUT (RCA)
Audio output from the AUDIO IN jack to an
external AV device.
18
SPEAKERS OUT
External speakers output.
19
KENSINGTON LOCK
Used for security and theft prevention.