ViewSonic CDP4262-L Car Video System User Manual


 
1
1. Unpacking and Installation
1.1. Unpacking
This product is packed in a carton, together with the standard accessories.
Any other optional accessories will be packed separately.
Due to the size and weight of this display it is recommended for two people to move it.
After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
LCD display
CD ROM
Remote control with AAA
batteries
Quick Start Guide
Power cord (1.8 m)
VGA cable (1.8 m)
RS232 cable (3.0m)
For EU For China
For North America For UK
*
* *
*
Remote Control
and AAA Batteries
Video Signal Cable
(D-SUB to D-SUB Cable)
CD ROM
POWER
SMART
VIDEO
SOURCE
PIP
INPUTON/OFF CHANGE
BRIGHTNESSCONTRAST
DISPLAY
AUTO
ADJUST
VOL UP
VOL DOWN
EXIT
MENU
SET
AUDIO
SOURCE
OPTION
Quick Start Guide
RS232 Cable
* The supplied power cord varies depending on destination.
NOTES:
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has
been approved by and complies with the safety regulations of the particular country.
You might like to save the package box and packing material for shipping the display.
1.3. Installation Notes
Due to the high power consumption, always use the plug exclusively designed for this product. If an
extended line is required, please consult your service agent.
The product should be installed on a at surface to avoid tipping. The distance between the back of
the product and the wall should be maintained for proper ventilation. Avoid installing the product in the
kitchen, bathroom or any other places with high humidity so as not to shorten the service life of the
electronic components.
The product can normally operate only under 3000m in altitude. In installations at altitudes above 3000m,
some abnormalities may be experienced.