ViewSonic CDP4262-L Car Video System User Manual


 
21
• POSITION - Select the position of this display
in the screen matrix.
• FRAME COMP. - Choose to turn the frame
compensation function on or off. If turned on,
the display will adjust the image to compensate
for the width of the display bezels in order to
accurately display the image.
• ENABLE: Choose to enable or disable the
Tiling function. If enabled, the display will apply
the settings in {H MONITORS}, {V MONITORS},
{POSITION}, and {FRAME COMP.}.
NOTE: The Tiling function will be disabled when
the [ON/OFF] button for PIP is pressed.
POWER ON DELAY
Select the delayed time until the power-on mode is
activated after the power is turned on manually or
automatically. This setting is useful in hiding start-
up messages and powering on the connected
devices at different timings.
The options are: {OFF}, {2 SEC.}, {4 SEC.},
{6 SEC.}, {8 SEC.}, {10 SEC.}, {20 SEC.}, {30
SEC.}, {40 SEC.}, {50 SEC.}.
CLOSED CAPTION
Choose to display or hide captions.
NOTE: This item is functional for VIDEO input only.
{OFF} - Captions are hidden.
{CC1} - Captions are displayed in sync with the
primary audio.
{CC2} - Information (related to the primary
audio) is displayed without sync.
{CC3} - Captions are displayed in sync with the
secondary audio.
{CC4} - Information (related to the secondary
audio) is displayed without sync.
{TT1 / TT2 / TT3 / TT4} - Four types of
information not related to the displayed images
are displayed. (For example, news and weather
forecast.)
NOTE: Check with each supplier of your video
software and external video devices in
advance whether they are compliant
with EIA-608-A. If their video signals are
not compliant with it, images may not be
displayed correctly.
CONFIGURATION2 RESET
Reset all settings in the CONFIGURATION2 menu
to factory preset values.
4.2.7. CONFIGURATION3 menu
PIP
1
2
3
SET EXIT MENU
3
:SEL :NEXT
POWER SAVE
HEAT STATUS
SCREEN SAVER
SIDE BORDER COLOR
CONFIGURATION3 RESET
CONFIGURATION3
:RETURN :EXIT MENU
51
POWER SAVE
Set the display to reduce the power automatically.
EXIT MENU
:SEL +-:ADJ :RETURN :EXIT MENU
POWER SAVE
RGB
VIDEO
ON
ON
{RGB} - Select {ON} to let the display enter
DPMS mode with no signal detected from the
HDMI Graphic mode, HDMI, DVI-D, or VGA
inputs after three successive cycles.
{VIDEO} - Select {ON} to let the display enter
power saving mode with no signal detected
from the HDMI Video mode or YPbPr inputs
after three successive cycles.
HEAT STATUS
This function allows you to check the thermal
status of the display at any time.
EXIT MENU
:RETURN :EXIT MENU
HEAT STATUS
COOLING FAN 1
COOLING FAN 2
BRIGHTNESS
OFF
OFF
NORMAL
TEMPERATURE:
SENSOR 1
SENSOR 2
35.7 C / 96.2 F
30.2 C / 86.3 F