Filter
Top Products
5
28
5. Use the Arrow buttons on the remote to highlight the input
source you wish to rename, then press MENU/OK.
6. Use the Arrow buttons to highlight Input Naming and press
MENU/OK.
The on-screen keyboard is displayed.
7. Use the Arrow and MENU/OK buttons to spell the custom
input name.
When you are finished, highlight OK and press MENU/OK.
8. Press EXIT.
Removing Unused Inputs from the Input List
To remove unused inputs:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Input
icon and press MENU/OK.
3. Use the Arrow buttons to
highlight Input Naming and
press MENU/OK.
4. Use the Arrow buttons on the
remote to highlight the input
source you wish to remove,
then press MENU/OK.
5. Use the Arrow buttons to
highlight Skip Input and press
MENU/OK.
6. Press EXIT.
SETTING UP CHANNELS
From the channel menu you can:
• Change the signal source
• Customize the master channel list
• Scan for new/additional channels
• Start a new channel scan
• Customize channel names
Changing the Signal Source
Using this option, you can change the signal source for the
coaxial (TV) input.
To change the signal source:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the TV icon
and press MENU/OK. The TV
Settings menu is displayed.
3. Use the Arrow buttons to
highlight Channels and press
MENU/OK.
4. Use the Arrow buttons to
highlight Signal Source.
5. Use the Arrow buttons to
change the setting to Cable or
Antenna.
6. Press EXIT.
To restore an input to the list, go to the Input Naming screen
and select Reset.