Vizio S3851w-D4 Car Speaker User Manual


 
Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into
your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire
or electric shock.
Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the
power cord and contact your dealer immediately. Do not try to repair your Unit yourself.
Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the
internal components may function abnormally. Unplug the power cord immediately and contact your
dealer for repair. Continued use of your Unit may cause fire or electric shock.
Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments
with heavy dust or high humidity may cause fire or electric shock.
Ensure that the power cord and any other cables are unplugged before moving your Unit.
When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage
the wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended
period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery
to leak which can damage the remote control or injure the operator.
See the important note and rating located on the bottom of the unit.
WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container
filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing,
rain, or moisture.
CAUTION - Danger of explosion or fire if battery is mistreated. Replace only with the same or specified type.
Do not leave the battery exposed to direct sunlight for a long period of time with doors and windows
closed. Do not disassemble the battery or dispose of it in fire.
Disconnect the mains plug to shut off when you experience trouble or the device is not in use. The mains
plug shall remain readily operable.
When wall mounting, be sure that the mounting surface is strong enough to bear the weight of the
Sound Bar.
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,
and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions
in a safe place for future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your Unit.
Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a
liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving your Unit from an area of low temperature to an area of high temperature, condensation
may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or
component damage.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your Unit and to protect it from overheating, be sure these openings are not blocked or
covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on
the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids
on your Unit.
The power cord must be replaced when using different voltage than the voltage specified. For more
information, contact your dealer.
When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power,
unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of un-isolated, dangerous voltage within your Unit that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and servicing instructions in the literature accompanying your Unit.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be located near your Unit and be easily accessible
h
IMPORTANT SAFETY INSTRUCTIONS