4. Administration
65
Local/Remote Share
Mode
Defines how the CN8000 is to be controlled when multiple
users have logged on, as follows:
Share: Enables both local and remote users to
simultaneously share control over the CN8000.
Commands are executed in a chronological order.
Local Occupy: Grants exclusive control to the local user.
Remote users can still view the session but cannot
execute commands.
Remote Occupy: Grants exclusive control to the remote
user(s). The local user can still view the session but
cannot execute commands.
In Remote Occupy Mode, users can take advantage of the
Message Board, which allows a user to take control of the
keyboard and mouse or keyboard, mouse, and video of a
Share port (see The Message Board, page 89).
Reset Some configuration changes only take effect after a
CN8000 reset. These include changes on the Network
page; a Log Server port change; enabling/disabling
browser access; and upgrading the firmware.
When those changes are made, a check is automatically
put in the Reset on Exit box.
To have the changes take effect, log out and then log back
in again. A wait of approximately 30 to 60 seconds is
necessary before logging in following a reset.
Note: If the CN8000’s performance degrades, reset it by
putting a check in the Reset on Exit box, and then log out /
log in.
Parameter Explanation
