CS428 User Manual
24
F7 QV
You can broaden or narrow the number of ports that get automatically scanned
by selecting only the ones you want with the QV (Quick View Scan) function.
[F7] is a toggle that selects or deselects the currently highlighted port for the
Quick View Scanning function (see F4, above). To select/deselect a port for
Quick View Scanning:
1. Double Click the port you want, or use the Navigation Keys to move the
highlight bar to it.
2. Press [F7].
When a port has been selected for Quick View Scanning, an arrowhead
displays in the QV column to indicate so. When a port is deselected, the
arrowhead disappears.
F8 Out
Clicking the F8 field, or pressing [F8] logs you out of OSD control of the
computers, and blanks the Console screen. This is different from simply
pressing [Esc] to deactivate the OSD, since with this function you must log in
all over again to regain access to the OSD.
Note: When you reenter the OSD after logging out, the screen stays blank
except for the OSD Main Menu. You must input your password before
you can continue.
cs428_2007-05.book Page 24 Thursday, May 17, 2007 5:08 PM
