Chapter 1. Introduction
9
No. Component Description
1 Power Socket The power cord to the AC source plugs in here.
2 Power Switch This is a standard rocker switch that powers the KH2508
A /
KH2516
A on and off.
3 Daisy Chain
Ports
When daisy chaining units (see Daisy Chaining, page 17),
the daisy chain cables plug in here. The port on the left is the
Chain In port; the port on the right is the Chain Out port.
4 Grounding
Terminal
The wire used to ground the unit connects here.
5Console 1
Ports
The KH2508
A / KH2516A supports two independent
consoles. If this is a single station installation, or if this is the
first station of a daisy chained installation, the keyboard,
monitor, and mouse that make up Local Console 1 plug into
section no. 5 and Local Console 2 plugs into section no. 6.
You can use any combination of PS/2 and USB keyboards
and mice for the console.
6Console 2
Ports
7 KVM Port
Section
The Cat 5e/6 cables that link to the KVM adapter cables
(which link to the computers) plug in here.
