Casio QT-2100 Manual

A SERVICE OF

next previous

P-100

Program 3

4-2-5-7 Programming function control 4 by range

Operation

5. Select “7. Allowed function 4” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>

key.

7. After programming, press the <ESC> key to proceed to the

next step.

8. Enter the start range No. and press the <YES> key.

(It starts “0001” if you skip to enter the start range.)

Then enter the end range No. and press the <YES> key.

(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.

10. Press the <ESC> key to return to the previous menu.

Range

Operation

1.Clerk Control

2.Menu Shift/2nd@

3.Mode Control

4.Allowed function 1

5.Allowed function 2

6.Allowed function 3

7.Allowed function 4

8.Allowed function 5 v

0.00

Allowed function 4

Enter Start range 0

End range 0

OK? YES

0.00

Allowed function 4

Enter Start range 1

End range 123

OK? YES

0.00

Allowed function 4

Substitution YES

House Bon YES

Operator Open Check YES

Media Change YES

Seat Number YES

Display On/Off YES

REG Mode YES

X/Z Mode YES

PGM Mode YES

Post Entry YES

Round Repeat YESv

0.00

Allowed function 4

Eat-in YES^

Take-out YES

Store YES

Recall YES

Dutch Account YES

Reverse Display YES

E-Journal Display YES

Home Position YES

Display Mode Change YES

All Void (Current only) YES

All Void (Complete Void) YES

0.00