P-41
QT-2100 Programming Manual
4-1-5 Programming the general feature
Operation
4. Select “5. General Feature” and press the <YES> key.
4-1-5-1 Programming the machine control 1
5. Select “1. Machine Control1” and press the <YES> key.
6. Select the field you want to change and press the <YES>/
<NO> key or enter the numeric value and press the <YES>
key.
7. After programming, you should press the <ESC> key to
return to the previous menu.
Field meaning
1. Machine number: (0 - 9999)
Not the ID code but the printing machine number.
2. Add mode:
You can choose Add 2 (ex. dollar and cent), Add 0 (ex. Japanese yen) or Add 1.
3. Reset the consecutive No. to initial value after taking daily fixed totalizer report:
Consecutive No. starts preset value +1. (Initial consecutive number: 1 - 999999.)
4. Country Rounding:
You can choose None, IF1, IF2, Danish, Norwegian/Swedish, Singapore.
5. Tax systems:
You can choose VAT/US/Canada/Singapore tax system.
6. VLD compulsory and drawer open:
You can choose “At once” and “After compulsory.”
7. Money-in-drawer limit alarm:
You can enter “Maximum value of left-most digit” and “ The number of zeros.”
Machine Feature
Machine Feature
1.Pulldown Group
2.Set Menu Table
3.Arrangement
4.Batch X/Z
5.General Feature
6.Scheduler
7.Check Print
8.Table Analysis v
0.00
General Feature
General Feature
1.Machine Control1
2.Machine Control2
3.Machine Control3
4.Machine Control4
5.Print Control
6.Report Control1
7.Report Control2
8.Communiction v
0.00
Machine Control1
Machine No. 0
Order of Date DD/MM/YY
Add Mode Add2
Reset consecutive number to
initial value after taking
daily fixed totallizer report No
Initial value for consecutive
number 0
Country Rounding None
Tax System VAT
Disable to amount tender in RF v
0.00
Machine Control1
Country Rounding None
Tax System VAT
Disable to amount tender in RF
/REG- mode YES
VLD compulsory & Drawer Open
At Once
Money-in-drawer limit alarm
Maximum value of left most
digit (0 to 9) 0
Money-in-drawer limit alarm
Number of Zeros (0 to 9) 0
0.00
