A SERVICE OF

logo

Open as PDF
next previous
P-14
Initialization
1-3. How to flag clear QT-2100 terminal (or INIT2)
Preparation:
1. All peripheral devices and this QT-2100 terminal should be
turned off.
2. Check the connection of all peripheral devices (such as
printer, display etc.) of this QT-2100 terminal.
3. Check the connection of this QT-2100 terminal to inline.
Operation:
4. Turn on all peripheral devices of this QT-2100 terminal.
5. Turn on this QT-2100 terminal with pressing the right-most
key of the top row and release the key after buzzer sounds.
6. After releasing the key, press the <ST> key.
7. Select “1. Flag Clear” and press the <YES> key.
The flag clear operation is finished.
Note:
Performing “Init 2” requires password “8888888888” .
10-10-01 12:34
INIT
1.Flag Clear
2.INIT2
0.00