A SERVICE OF

logo

Open as PDF
next previous
P-104
Program 3
4-2-5-11 Programming commission rate by range
Operation
5. Select “11. Commission Rate” and press the <YES> key.
6. Select an appropriate record, enter the rate and press the
<YES> key.
7. After programming, press the <ESC> key to proceed to the
next step.
8. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
9. Press the <YES> key.
10. Press the <ESC> key to return to the previous menu.
Range
Operation
5.Allowed function 2^
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5
9.Arrangement
10.Report
11.Commission Rate
12.Table Range
0.00
Commission Rate
Enter Start range 0
End range 0
OK? YES
0.00
Commission Rate
Enter Start range 1
End range 123
OK? YES
0.00
Commission Rate
Commission Rate(1) 0.00
Commission Rate(2) 0.00
0.00