6
Bottom woofer replacement continued:
6
The picture to the right shows what
the SR1522z looks like with the grill and
bottom woofer removed. Place the
new woofer (part #0013913) where the
old one was. Follow the same steps as
above, but backwards 5 to 1, making
sure to keep the led PCB assembly cable
in front of the woofer. Power up the
SR1522z and the new woofer should now
be pumping out glorious lows. Awesome,
you just replaced a 15” woofer!
5
The positive (solid yellow) and negative
(solid blue) cables are still attached to
the woofer terminals. Remove the cables
from their terminals simply by pushing
down on the terminal and pulling out the
cable.
+
-
push down
