A SERVICE OF

logo

121
Setting Tag Data Links Section 6-2
6-2 Setting Tag Data Links
6-2-1 Starting the Network Configurator
Procedure Tag data links are set by using the Network Configurator. Use the following
procedure to start the Network Configurator.
Starting from the Windows Start Menu
To start the Network configurator, select OMRON - CX-One - Network Con-
figurator for EtherNet/IP - Network Configurator from the Windows Start
Menu.
Starting from the IO Table Dialog Box in
CX-Programmer
To start the Network configurator, select the Unit in the PLC IO Table Dialog
Box and select either of the options for Start Special Application from the
pop-up menu. Only operation will be started even if Start with Settings Inher-
ited is selected.