A SERVICE OF

logo

51
A
Setup Instructions
Using a Parallel Cable
1 Attach Automatic Two-Sided Printing Module.
a Turn knob on printer’s Rear Access Door
counter-clockwise and remove door.
b Press button on each side of
Automatic Two-Sided Printing Module,
then insert module into back of printer.
2 Connect Parallel Cable
If you want to connect your 970C
Series printer to a network, refer to
the HP DeskJet 970C Series Printer
Network Guide for Windows for
instructions.
3 Plug in Electrical Power Cord.
Parallel Cable
970C.book Page 51 Tuesday, February 1, 2000 11:31 PM