43
DFW-SX900
DFW-X700
Specifications
Board configuration
CN4
CN3
CN2
CN1
PCI Card Edge
CN1, 2, 3 : IEEE1394 6-pin connector
CN4 : External power supply connector
PCI card edge :
124-pin PCI local bus connector
Pin assignment
IEEE1394 6-pin connector External power supply connector
Pin No.
Signal
135
246
1
2
3
4
5
6
VP
VG
TPB*
TPB
TPA*
TPA
Pin No.
Signal
1
2
3
4
+12 V
GND
GND
+5 V (Not used)
Common to CN1, CN2, and CN3.
External power supply connector
The IEEE1394 bus power supplied from PCI bus is about
0.5 A. If you need more power, use a separate power
branch cable and connect the FDD power socket to this
connector. You can get up to 1.5 A power through this
connector.
(Example: Mounted connector 176153-4 (AMP))
: IEEE1394-1995 standard
: 3
: +5 V, +12 V
: 10 to 35°C (no condensation)
: 107 × 138 mm
: IEEE1394 6-pin connector
: 176153-4 (AMP) or equivalent
: Setup disk (1), Operating Instructions (1)
I/F standard
Number of ports
Supply voltage
Operating temperature
Dimensions
Connectors
IEEE1394
External power supply
Accessories
HOST ADAPTER CARD DFWA-400
