16
GB
After connecting all of your components to the
receiver, check that the connections were made
correctly as follows.
1 Press ?/1 to turn on the receiver.
2 Press the button for the component
(VIDEO, DVD, TV/SAT, HDD/MD, MULTI
CH) that you want to check.
Or rotate INPUT SELECTOR on the
receiver.
3 Turn on the component and start
playback.
4 Press MASTER VOL +/– to adjust the
volume.
Or rotate VOLUME on the receiver.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 43 and take the
appropriate measures to correct the problem.
Checking the connections
