Using the supplied remote
33
GB
DISC 9 When operating a CD player or
video CD player, press to select a
disc directly (multi-disc changer
only).
DISPLAY
qa Press to select the information
displayed on the display of the
receiver or TV screen.
DUAL MONO
w;
Press to select a bilingual play
mode (Dual Mono).
ENTER (After
pressing ALT)
qj
Press to select a channel, disc or
track after a number button has
been pressed.
FM MODE
5 Press to select FM monaural or
stereo reception.
HDD
FUNCTION
HDD/CD
ws
Press to switch the function of the
hard disc audio recorder.
Input buttons
wd
Press to select the input. Use AV1
and AV2 to select the command
mode of the remote.
Note that the inputs are factory-set
as described in the table above. If
you want to change the factory
setting of the buttons to match your
particular components, do the
procedure in “Programming the
remote” (page 38).
Inputs are assigned to the
components as follows.
VIDEO: VCR
DVD: DVD player
TV/SAT: TV/tuner
HDD/MD: Hard disc/MD deck
TUNER: Built-in tuner
See “Table of buttons used to
control each component” on
page 36 for information about the
buttons that you can use to control
each component.
INPUT MODE
qs
Press to select the audio input
mode.
JUMP/TIME*
qk
When operating a TV:
Press to switch between the current
channel and the previous channel.
When operating a CD player, video
CD player or DVD player:
Press to display the time
information.
MAIN MENU
qd
Press to select the menu of the
receiver.
Remote
button
Function
MASTER VOL
+/– qf
Press to adjust the volume level of
all speakers at the same time.
MEMORY wj Press to store radio stations.
MODE wa Press to select a sound field.
MULTI CH
3
Press to select the components
connected to the MULTI CH IN
jacks of the receiver.
MUTING
qg Press to mute the sound.
Remote
button
Function
continued
