© Titan Tool Inc. All rights reserved. 5
English
Problem
A. Restricted air ow or no air
ow
B. The turbine has no power
C. Excessive arcing/sparking in
the turbine
Cause
1. Air ow adjustment knob on the spray gun
is turned off
2. Air lters are clogged
1. No power at the power supply
2. Circuit breaker has been tripped.
3. Worn turbine brushes
1. Worn turbine brushes
2. Damaged commutator
Solution
1. Adjust the air ow adjustment knob
2. Clean or replace the lters
1. Check the power supply
2. Reset the breaker. If problem persists, have turbine
inspected at an authorized Titan service center.
3. Have the brushes replaced at an authorized Titan
service center
1. Have the brushes replaced at an authorized Titan
service center
2. Replace the turbine (contact a Titan service
technician)
Troubleshooting
IMPORTANT:
• The turbine motor can be damaged if not serviced
properly. Have the brushes (Kit P/N 0524159) checked for
wear by an authorized service center every 400 hours.
• Clean lters regularly. Clogged lters cam cause
excessive heat and possibly damage the unit.
• For additional troubleshooting information, see the manual
that came with your gun.
Product Registration
Register your product online at www.titantool.com. Proper
registration will serve as proof of purchase in the event your
original receipt becomes misplaced or lost.
Serial Number Location
Specications
Air pressure ................... 5.5 psi
Power ............................ 120VAC, 60 Hz, 9.0 A
Turbine weight ............... 16.5 lbs
Main hose length ........... 20 ft
Spray gun included ........ Maxum II
Patents
These products are covered by one or more of the following U.S. patents:
D623,660 5,550,336 5,556,255 5,639,222 5,702,131 5,558,492 5,772,711
Titan 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satised with a TITAN unit, you may return it for full credit
toward another TITAN product of equal or greater value.
