A SERVICE OF

logo

Open as PDF
next previous
Introduction
1–4 152379 Rev C
Optimization of the PV100S MPPT will result in an increase in energy production.
The user is encouraged to study the PV array’s I-V curves and to adjust the MPPT
user settable parameters accordingly.
Utility Voltage/Frequency Fault Automatic Reset
In the event of a utility voltage or frequency excursion outside of preset limits, the
PV100S will stop operation and display a fault at the operator interface. Once the
utility voltage has stabilized within acceptable limits for a period of at least
5 minutes, the PV100S will automatically clear the fault and resume normal
operation. Voltage and frequency fault setpoints are detailed later in this section.
Figure 1-1
Maximum Peak Power Tracking