A SERVICE OF

logo

B-6 WorkCentre Pro 421 User Guide
GDI Print Driver
A GDI printer driver is available for the WorkCentre Pro 421
copier products - you can download it from the Drivers area of
www.xerox.com. A User Guide and installation instructions are
included within the downloaded printer driver software.
The PC requirements are shown below:
Parallel port on the PC must be set to bi-directional.
IEEE 1284 Parallel Cable (10 metres or 30 feet maximum).
NOTE: You cannot have the 421 PCL driver installed on the
same PC as the GDI driver.
Windows 95 98 2000 NT4 XP
Processor (MHz)
- Minimum
- Recommended
150
450
150
450
150
450
150
450
233
450
RAM (Mb)
- Minimum
- Recommended
32
64
64
128
64
128
64
128
64
128
Disk Space (Mb)
- Minimum44484