Xerox Document Centre System Administration Guide Page 16 - 55
16. Internet Services
16. Internet Services
TCP/IP
To specify TCP/IP settings:
1. Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2. Click the Properties tab or click Properties in the directory
tree.
3. Select Connectivity, then select Protocols in the directory
tree.
4. Select TCP/IP in the directory tree.
5. Select Protocol Enabled to enable TCP/IP.
CAUTION:
Disabling TCP/IP will affect NetBIOS/IP, LPR/LPD, FTP, SNMP,
and Raw TCP/IP printing. Internet Services will not be available
until TCP/IP is enabled from the control panel of the Document
Centre.
6. If your Document Centre has an enabled token ring card, select
either Ethernet or Token Ring from the Physical Connection
drop-down list.
