Xerox Document Centre System Administration Guide Page 18 - 5
18. Network
Accounting
18. Network Accounting
4. Perform the Network Accounting Setup.
a) Press the Network Accounting Setup button.
b) Press the Enabled button.
c) Press the Save button to retain the settings.
d) Press the Exit Tools button.
5. Verify Accounting is enabled.
a) Press the Job Status button on the front panel then press
the Features button.
b) The Touch Panel should display a screen with two
buttons. One is the User ID button and the other is the
Account ID button. This indicates the system has
enabled accounting successfully.
Go to the network accounting server and...
1. Activate the Document Centre.
a) Open the application and configure it so that the TCP/IP
address (or fully qualified domain name) of Document
Centre is entered as the destination for retrieval of data.
2. Proceed to the next section of this procedure called Go to the
workstations and...
