Page 8 - 4 Xerox Document Centre System Administration Guide
7. Set Maximum Connections and Timeout.
a) Press the Connections button.
b) Touch the Maximum Connections soft button on the
Touch Screen and on the keypad enter the desired
maximum connection number between 10 and 30. It is
recommended that this value should be set at the default.
c) Touch the Connection Timeout soft button on the
Touch Screen. On the keypad enter the desired number
of seconds between 1and 32,767 Press Save to exit the
connections screen.
8. Exit the Tools Menu.
a) Press the Exit Tools button. The printer will store the
settings you have made.
9. Print a Configuration Report page from your printer to use
in the remainder of the installation.
a) Repeat Steps 2a and 2c.
b) Select System Setting.
c) Select Configuration Report.
d) Select Print Configuration Report Now.
e) Press Cancel.
10. Prepare for print driver installation.
a) From the documentation package supplied with your
printer, retrieve the CentreWare Network Services
CD-ROM and the document entitled CentreWare Net-
work Services Guide. Proceed to the next section of
this procedure called Go to a Workstation and...
