Transmitting Documents
5-30 WorkCentre Pro 555/575
3. Use the Numeric Keypad to enter the number of hours (you must
use 2 digits) for the machine to store the document, then press
Enter
.
4. The menu selection screen redisplays. Press
Stop
to return to
the Standby Mode.
Resending a Stored Fax
When the Resend Stored Fax feature is enabled, any document that
exceeds the number of allowed redials is not cleared, but saved in
memory for a specified length of time. Perform this procedure to
resend a fax that is stored for resending. If the facsimile number you
dialed was not correct, you can change the number before resending
the document. Each time this procedure is performed, the number of
redials counter is reset.
To resend a stored fax:
1. Press:
after 2 seconds...
2. Press the or keys to view the jobs stored for
resending.
If the job you want to resend was dialed using the Numeric Keypad
and with no Fax Options, go to Step 3. If the job you want to resend
was other than the above, go to Step 5.
Menu
Resend stored fax
ENTER or CANCEL
Job number: 016
1234567890
