Transmitting Documents
5-34 WorkCentre Pro 555/575
To perform a ITU-T Relay Transmission:
1. Load the document face down in the Document Support.
2. Select the desired
Resolution
and
Contrast
.
3. Press:
4. Using the Numeric Keypad enter a relay box number, then press
Enter
.
5. Select the Password option:
To assign a password, press and go to step 6.
If you do not want to assign a password, press and go to
step 7.
6. Using the Numeric Keypad, enter the password you want to
assign to this box, then press
Enter
.
7. Enter the Speed Dial or One Touch key that you preset for the
Relay Station, (You must press
Phonebook
then press
Enter
before entering a speed dial number).
The document is sent to the Relay Station. The Relay Station will
then retransmit the document to the specified End Stations.
Note: A Password is required to receive to a Relay Box.
Menu
Box number (20 max)
[
]
1.Yes
Set up password
2.No
Send(Relay)
Enter fax number
