Overview and Setup
1-31-3
PACKAGING AND PARTS
After removing the instrument from the shipping carton, inspect for
possible damage. If any damage is noted, contact the transportation
company immediately. Do nothing more until the carrier’s agent has
inspected the damage.
If damage is not evident, check to ensure that all items are included
(refer to the parts list below).
Your Package Should Include…
1 400 B/W Reflection Densitometer
1 Carrying Case
1 Operation Manual
1 Reflection Calibration Reference 400-62
1 Warranty Registration Card
1 P/N SE30-61 Battery Charger, 115V
or P/N SE30-62 Battery Charger, 230V
1 P/N SD01-41 Certificate of Calibration
Along with this Operation Manual, several important notices are
included. You should read each of these notices before using the
instrument.
Return Packaging
Your X-Rite 400 was packaged in a carton specially designed to
prevent damage. If re-shipment is necessary, the instrument should
be re-packaged in the original carton. If the original carton is not
available, a new one can be obtained from X-Rite.
