Filter
Top Products
11-EN
Titling Discs/Stations
It is possible to title your favorite CD's or radio
stations.
1 Press the TITLE button and select the title
display mode.
For details, see Displaying the Title/Text (page
10).
2 Press and hold the TITLE button for at least 3
seconds. The first character will blink.
3 Rotate the MODE (Audio Control) knob to select
the desired letter/numeral/symbol available for
naming. ("A" for example).
4 Press the MODE (Audio Control) button to store
the first character. The first character will stop
blinking and the display will automatically
advance to the next character. When that
character begins to blink, you may choose the
next letter or symbol of your title.
5 Repeat the steps 3 and 4 above to complete the
titling. Pressing the MODE (Audio Control) button
after entering the eighth character, automatically
stores the title into memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
6 Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
• The memory capacity for the disc titles is 18. If you try
to store beyond the limit, the display will show "FULL
DATA." At this point, no more titles can be stored.
• To input a new title, one of the previously inputted
titles must first be deleted.
• For radio broadcast stations, up to 24 station titles
(including both FM and AM) can be stored in memory.
• When you want to erase a title, enter the "
" symbol
into all spaces.
• The CD Changer title length or memory capacity
varies depending upon the model being used.
• Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Searching for Titled Discs/Stations
If a CD/Station is titled, you can do a search for it.
(To title CDs or Stations, refer to "Titling Discs/
Stations" on page 11.)
1 Press and hold the T.S.M. button for at least 2
seconds. The title blinks in the display.
2 Press the DN g or f UP button to select
the desired disc/station title.
3 Press the T.S.M. button to play the selected disc
or station.
The unit will automatically search for the disc or
station and begin play.
NOTE
This function cannot be performed when using a multi-
changer switching device.
Erasing Disc Title
(CD/CD Changer only)
1 Press the TITLE button to select the disc titling
mode. Then, press and hold for at least 3
seconds.
2 Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3 Press the DN g or f UP button repeatedly
unitl the disc title you want to erase is displayed.
4 Press and hold the -/J button for at least 2
seconds to erase the disc title displayed.
5 Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
NOTE
• You cannot erase a CD-TEXT.