Filter
Top Products
18-EN
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
Notes
• This function is available only when AUX SETUP is set to ON. For
details, refer to “Setting the AUX SETUP Mode” on page 19.
• Do not connect a Flash Memory Device and an AUX Input Terminal
connector at the same time.
Setting
You can customize the unit to suit your own preferences and usage.
From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can
be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
BLUETOOTH
*1
GENERAL AUDIO
*2
DISPLAY iPod & USB
(e.g. Select GENERAL)
GENERAL:
CLOCK ADJ
*3
PLAY MODE AUX SETUP AUX NAME
*4
AUX GAIN
*4
POWER IC DEMO
DISPLAY:
DIMMER SCROLLTYPE TEXT SCR
iPod & USB:
USB SEARCH USB SKIP PANDORA PANDORA VL
*5
*1 Refer to “BLUETOOTH SETUP” on page 21.
*2 Refer to “Sound Setting” on page 14.
*3 Refer to “Setting the Time” on page 10.
*4 Displayed only when AUX SETUP is set to ON.
*5 Displayed only when PANDORA is set to ON.
3
Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select POWER IC)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select POWER IC ON or POWER IC OFF.)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Portable player, etc.
Main unit
or
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
Rotary encoder//ENTER