Alpine CDE-W235BT Car Stereo System User Manual


 
30-EN
5
Press ENTER.
The selected telephone will be called.
If one name has several numbers registered in the telephone
book, press ENTER after selecting the name
*
, then turn the
Rotary encoder to choose the desired number and press
ENTER, the telephone will be called. Press and hold
ENTER for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognized, default number will be
displayed.
Notes
•Press to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
The names registered in the telephone book are displayed. If the name is
not registered, a number is displayed. If both name and number cannot
be displayed, “ID UNSENT” will be displayed.
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Voice Dial Operation
You can make a call using voice commands.
Setting item: VOICE DIAL
When the speak mode is activated and “SPEAK” is
displayed, say the telephone number
*
, name
*
you want to
call into the microphone.
* This message depends on the voice tag prestored in the mobile
phone.
Notes
You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, “NO SUPPORT” is displayed for 2 seconds.
The Voice Dial function performance depends on the recognition range
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “NO CALL” is displayed for
2 seconds.
Redialing a Number In Outgoing History
Previously dialled telephone numbers are stored in dialled calls history.
You can redial a number by searching from dialled calls history.
Setting item: DIALLED
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Setting item: RECEIVED
Dialing a Number In Incoming Missed Call
History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Setting item: MISSED
Dialing a Number In The Phone Book
Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
Setting item: PHONE BOOK
Notes
The order of the list display depends on the setting of “PB ORDER”
(refer to “Changing the Phone book List Order” on page 28).
If the call history or phone book of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
You can display the information of a number stored in phone book by
pressing VIEW. Each press changes the display as Name Telephone
NO. Telephone label
*
Name
If the information can not be obtained, “NO NAME”, “NO NUMBER”
or “NO LABEL” will display.
* The telephone label of a number depends on the number information
stored in Phone book of the mobile phone, which includes 5
types-GENERAL, MOBILE, HOME, OFFICE, and OTHER.
Phone book alphabet search function
You can select the first three letters to search for a desired name in
phone book list by using the Phone book alphabet search function.
For example:
Searching a name “Michael James”
The following example explains how the search is performed.
Depending on the setting in PB ORDER (refer to “Changing the Phone
book List Order” on page 28), the phone book is listed in first name or
last name order. Please search for the first name or last name according
to the setting.
1
Press BAND/ABC SKIP while in the phone book list, the
phone book alphabet search mode is activated.
The letter selection list is displayed.
2
Turn the Rotary encoder to select the first letter (e.g. M),
and then press .
The letter selection list is displayed.
3
Turn the Rotary encoder to select the second letter (e.g. I),
and then press .
The letter selection list is displayed.
4
Turn the Rotary encoder to select the third letter (e.g. C),
and then press ENTER.
The names stored in phone book which begin with “MIC” are
searched.
5
Turn the Rotary encoder to select the desired name (e.g.
Michael James), and then press ENTER to make the
call.
Notes
If the selected name has several numbers registered in phone book, you
need to turn the Rotary encoder to select the desired number, and
then press ENTER.
•Press in step 3 or 4 to delete the current entry and return to the
previous step.
You can search for a name by its first letter, first two letters or first three
letters. Press ENTER after entering the desired number of letters. A
list displays the names beginning with the entered letter(s).