Filter
Top Products
7-EN
4
Rotate the Double Action encoder to select year,
month, day, hour or minutes to be set.
5
Press /ENTER.
The year setting mode is activated, and the year blinks.
(When “year” is set)
6
Rotate the Double Action encoder to set year, and
then press
/ENTER.
The setting for year is complete. (When “year” is set)
7
Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
Displaying the Calendar/Time
Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
• Selecting any tuner or iPod function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• If an HD Radio Tuner is connected, text information can be
displayed. Refer to “Changing the Display (HD Radio mode only)”
(
page 9).
• If an XM receiver is connected, the Auxiliary Data Field can be
displayed. Refer to “Setting the Auxiliary Data Field Display”
(
page 28).
• If an iPod is connected via USB, the album cover screen can be
displayed. Refer to “
Changing the Display” (page 12).
This unit cannot receive HD Radio™ signals (digital terrestrial radio).
In order to activate the digital radio functions described below, an
optional HD Radio Tuner module must be connected through the
Ai-NET bus.
How to View the Display
<Radio screen display example>
1 Mode display
2 Preset number
3 Volume
4 Tuning mode
5 Frequency
6 Calendar/Time
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
Radio
TUNE/A.ME
VIEW
/ENTER
SOURCE
Double Action encoder
BAND
PRESET
4
5
6
3
1
2