Filter
Top Products
40-EN
Installation and Connections
• PXA-H701 + IVA-D300 series Head Unit + CD Changer +
Navigation System + External Amplifier
NOTE
Also refer to the operating instructions of the KCE-900E. For
details, contact your store of purchase or an Alpine Information
Center.
Please observe the following when using Fiber Optic
Cable.
• Do not coil the Fiber Optic Cable smaller than a 30mm radius.
• Do not place anything on top of the Fiber Optic Cable.
Battery
NAVIGATION
INPUT
REMOTE INPUT
VIDEO OUTPUT
RGB
RGB OUTPUT
GUIDE OUTPUT
NTSC VIDEO
OUTPUT
NTSC
Blue/White
Blue/White
Not used in this system
To External Amplifier Remote ON Cable
Connect to a metal part of
chassis body with a screw.
Remote OUT Cable
Remote ON Cable
Grounding Cable
Battery Power Cable
Rear Output (L)
Rear Output (R)
RGB Cable
(Sold Separately)
Guide Control Cable
Navigation
KCE-900E
(Sold Separately)
IVA-D300 series
Head Unit
Fiber Optic Cable (
Sold Separately
)
White/Green
Front 1 Output (L)
Front 1 Output (R)
Front 2 Output (L)
Front 2 Output (R)
RCA connection cable
Guide Control Cable
White/Green
Ai-NET Compatible
CD Changer
★★
Ai-NET Cable
(Included with CD Changer)
Fiber Optic Cable
(Sold Separately)
Ai-NET Cable (Included)
★
Centre Output or Subwoofer Output (L)*
Subwoofer Output or Subwoofer Output (R)*
To External
Amplifier
(L)
(R)
FRONT 1
(FULL RANGE
/TWEETER)
FRONT 2 REAR
SUBWOOFER
CONTROL UNIT
MIC
GUIDEINPUTOUTPUT (L) (R)
Ai–NET IN
ANALOG 2
ANALOG 1
CHANGER IN
ANALOG 3
POWER SUPPLY
CHG
DIGITAL 2
CD/DVD H.U.
DIGITAL 1
DVD
DIGITAL 3
CENTER
SELECTABLE
SUBWOOFER
NOTES
★ When connecting a Optical Digital CD
Changer
★★ When connecting a Optical
Digital CD Changer, change
the Digital/Analog switch of
the CD Changer to “2”
(Digital Output)
12
* When the subwoofer is connected to the
centre speaker output jack, it becomes
subwoofer output (L or R).
In this case, change the setting of the
centre speaker to subwoofer in “Setting
the speakers” (page 4).