Filter
Top Products
FR
ES
DE
SE
IT
9-EN
Setting the Brightness of the
Backlight
It is possible to change the brightness of the LCD
panel's backlighting to more closely conform to
the vehicle's interior lighting. This makes the
screen easier to view.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and
select DIMMER.
3 Press the 4 or 3 button within 10 seconds to set
the value.
AUTO:
Automatic adjustment of the screen brightness in
conformity with vehicle interior brightness.
HIGH:
Maximum screen brightness.
LOW:
The preset screen brightness that was set when
adjusting the minimum backlight level.
4 Press the SET UP button to finish adjustments.
Adjusting the Lowest Level of the
Backlight
It is possible with this equipment to adjust the
minimum brightness level for backlighting (LOW).
This is useful, for matching the screen brightness
to the dashboard for driving at night. This setting
is recalled with the AUTO setting corresponding
to the vehicle's interior lighting.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and
select DIMMER Lv.
3 Press the 4 or 3 button within 10 seconds to set
the value.
4 Press the SET UP button to finish adjustments.
SET UP
AUX1
DIMMER AUTO
DIMMER Lv. -
OPEN/CLOSE
OFF
OUT INT. ON
AUTO
HIGH LOW
2
3
SET UP
AUX1
DIMMER AUTO
DIMMER Lv. -
OPEN/CLOSE
OFF
OUT INT. ON
LOW HIGH
2
3
Setting Automatic Opening/
Closing of Monitor
Simply turn the ignition key to ACC ON or OFF to
automatically open or close the TV display.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds to
select OPEN/CLOSE.
3 Press the 4 or 3 button within 10 seconds to set
the value.
AUTO:
Automatic opening or closing of the display in
depending upon whether the ignition switch is ON
or OFF.
OFF:
Manual opening or closing of the display.
4 Press the SET UP button to finish adjustments.
SET UP
AUX1
DIMMER AUTO
DIMMER Lv. -
OPEN/CLOSE
OFF
OUT INT. ON
AUTO
OFF
2
3