Filter
Top Products
FR
ES
DE
SE
IT
11-EN
Switching the Opening Screen
You can change the opening screen to your liking.
NOTE
After carrying out the steps 1 to 3 of "Viewing the
switching display modes" described on page 6, perform
the operation shown below.
1 Press the SET UP button.
2 Press the or button within 10 seconds and
select H.U. IND.
3 Press the or button within 10 seconds to
set the selection.
ON:
Special opening screen.
This setting is used when combining with the
Flagship System model.
OFF:
Normal opening screen.
4 Press the SET UP button to finish adjustments.
Turning Sound Guide Function
On or Off
This function will give audible feedback with
varying tones depending upon the button
pressed.
1 Press and hold the PWR button for 2 seconds
with the power OFF and turn the Sound Guide
ON or OFF.
SET UP
AUX1
H.U. IND. ON
OFF ON
3
3
NAVIGATION AUX1 AUX2
Switching the Video Screen
It is possible to change the video source for
display while retaining the present audio portion.
1 Press the V.SEL button.
2 To release press and hold the V.SEL button for 2
seconds.
Using the External Input Terminal
It is possible to enjoy video and sound from a
video camera, etc. by simply connecting it with
an optional adapter cable.
NOTE
With the above connections, video source switching and
settings and adjustments at adjustment screens are not
possible.
AUDIO OUT
RLVIDEO OUT
Optional adapter cable
(RCA pin plugs
[yellow, red, white]
3.5ø miniplugs).
Video camera, etc.
Main unit