Filter
Top Products
8-EN
DVB-T Operation (Optional Europe Only)
Operable when optional Alpine DVB-T is connected. When
DVB-T is selected in "Source Name" under AUX Setup
Operation (page 12), the DVB-T is displayed in Source
Select screen.
Refer to owner's manual of DVB-T for details.
1 Touch the display panel to display the
operation control bar.
• The operation control bar changes to the visual
screen in the DVB-T mode for 5 seconds after
an operation has been performed. Touch the
display panel to display the operation control
bar again.
12345678
9
1 ▼ CH
Decreases channels one by one.
▼ Fav
Decreases the preset numbers one by one.
2 TUNE
Changes the tuning way (manual mode <CH>
and preset number <Fav>).
3 ▲ CH
Increases channels one by one.
▲ Fav
Increases the preset numbers one by one.
4 Scan
This initiates the auto seek mode.
5 A/V
Switches the input source of DVB-T tuner.
6 EPG
Displays program guide.
7
▼
▼
▼
▼
Displays the Menu Control screen.
• Press and hold function is for future product
control.
8 Power
Turns the DVB-T device ON/OFF.
9 Display Mode Setting
See Display Mode on page 10 for details.
Menu Control Screen
2
2
4
1
22
5
3
1 RETURN
Sends to return command to the source device.
2
▲
▲
▼
▲
This function is same as source remote control,
up, down, right and left buttons.
3
Returns to the previous screen of monitor menu.
4
MENU
Sends the Menu command to the source device.
5 ENTER
Enters the selected item.
• Operation may differ depending on the connected
device. Refer to owner's manual of the connected
device.
290533_TME370_r13.indb E8290533_TME370_r13.indb E8 7/29/09 1:29:13 PM7/29/09 1:29:13 PM