Filter
Top Products
SPECIAL APPLICATION
400-0422-001
16
Cause 4: The display has a problem.
Solution: Make sure the display has power
and is turned on. If there is still no
display, please call Altinex at
(714)-990-2300.
8.3 NO SOUND
Cause 1: The source has a problem.
Solution: Check the source and make sure
that it is working at an appropriate
volume level and all source
connections are correct. If the
source is working and there is still
no sound, see Cause 2.
Cause 2: The wrong input is selected.
Solution: Select the video input that
corresponds to the audio input. If no
sound is present, see Cause 3.
Cause 3: Cable connections are incorrect.
Solution: Make sure that the cables are
connected properly. If the S-Video
input is being used, make sure the
audio source is connected to the
S-Video audio input. Also, make
sure that the continuity and wiring
are good. If there is still no sound
present, see Cause 4.
Cause 4: Destination amplifier has a
problem.
Solution 1: Make sure that the destination
amplifier is powered. If there is still
no sound, see Solution 2
Solution 2: Set the volume of the destination
amplifier to a reasonable level. If
there is still no sound, call ALTINEX
at (714) 990-2300.
ALTINEX POLICY 9
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at
www.altinex.com for details on warranty and
return policy.
9.2 CONTACT INFORMATION
ALTINEX, INC
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com