Filter
Top Products
SPECIAL APPLICATION
400-0422-001
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
AP445-401. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your AP445-401 and to prevent fire
and shock hazard. Please read them carefully and
heed all warnings.
1.1 GENERAL
• Do not open the unit or power supply case, there
are high-voltage components inside.
• There are no user serviceable parts inside.
Qualified ALTINEX service personnel must
perform all service on the AP445-401.
1.2. RACK-MOUNTING SAFETY GUIDELINES
• The maximum operating ambient temperature
for this unit is 35°C.
• Never restrict the airflow through the devices fan
or vents.
• Distribute units evenly inside the rack.
Hazardous conditions may be created by an
uneven weight distribution.
• Connect the unit to a properly rated supply
circuit.
• Reliable Grounding should be maintained.
1.2 INSTALLATION
• For best results, place the AP445-401 on a flat,
leveled surface in a dry area away from dust and
moisture.
• To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the AP445-401
in direct sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
• Handle the AP445-401 carefully. Dropping or
jarring can damage the unit.
• Do not pull the cables that are attached to the
AP445-401.
• Do not place heavy objects on top of the
AP445-401.
• If the AP445-401 is not used for an extended
period, disconnect the adapter from the wall to
avoid fire, shock, and loss of power.
1.3 CLEANING
• Unplug the AP445-401 adapter before cleaning.
• Clean only with a dry cloth. Never use strong
detergents or solvents, such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.
1.4 FCC / CE NOTICE
• This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at their expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.