Filter
Top Products
15
7
7
This is what the plate adapter (left) and
diaphragm (right) both look like. Place
the new diaphragm (part # coming
soon) where the old one was. Follow the
same steps as above, but backwards
6 to 1. Power up the S408 and the new
diaphragm should now be pumping
out those highs again. Sweet, you just
replaced a diaphragm!
Diaphragm replacement continued:
6
6
This is what the plate adapter and
diaphragm look like after they have
been removed from the horn assembly.
The diaphragm is separated from the
plate adapter simply by pushing down
on the terminals.