Filter
Top Products
17
3
3
Two cables need to be removed from
the input assembly PCB (as shown
on the left and above): (1) the solid
black cable attaches to the negative
terminal (connection J4). This is for
the input jack, and (2) the grey and
black cable attaches to the positive
terminal (connection J3). This is for the
thru jack. Do not force cable removal
or connection, although needle-nose
pliers may aid in loosening the crimped
cables.
Input assembly replacement continued:
2
2
Once loosened, the input assembly may
be easily removed from the cabinet. Do
not completely take the input assembly
off yet, as two cables need to be
removed fi rst.
Pull out
Pull out
1
1
2
2
J4
J4
-
-
Input
Input
J3
J3
+
+
Thru
Thru
1
1
2
2
J4
J4
-
-
Input
Input
J3
J3
+
+
Thru
Thru
Pull out
Pull out
2
2
1
1
J4
J4
-
-
Input
Input
J3
J3
+
+
Thru
Thru