Filter
Top Products
8
3
3
Carefully begin to remove the woofer.
Caution: The woofer is approximately
8 pounds with the weight unevenly
distributed.
Bottom left woofer replacement continued:
4
4
The positive (blue and black) and
negative (solid black) cables are still
attached to the woofer terminals.
Remove the cables from their terminals
simply by pushing down on the terminal
and pulling out the cable.
5
5
The picture above shows what the S408
looks like with the grill and bottom left
woofer removed. Place the new woofer
(part #0011806) where the old one was.
Follow the same steps as above, but
backwards 4 to 1. Power up the S408
and the new woofer should now be
pumping out glorious lows. Awesome,
you just replaced an 8” woofer!
+
+
-
-
push down
push down
*
*
If you fi nd it too diffi cult to connect the
cables to the woofer terminals due to
the short length of the cables, there
is an easier (albeit lengthier) way to
connect them. Instead of reconnecting
the cables to their terminals, just attach
the woofer to the cabinet as normal.
Follow steps 1-5 on how to remove the
horn assembly (pages 11-12) as this is
an easier way to access the woofer
terminals without having to work under
such tight circumstances!