Filter
Top Products
9
Bottom right woofer replacement:
2
2
Eight screws need to be removed
from the woofer using the phillips head
screwdriver. Once the screws are
removed, the woofer may be loosened
by prying a fl at head screwdriver in
between the cabinet and the woofer;
a good place to start is in the notches
located just below the horn assembly
and above the woofer (as pointed out
by the arrows in the picture above).
Also note the “tinsel dressing teardrops”
(circled above) which are facing
upwards. The woofer should be placed
back the same way. It is for visual
consistency. More importantly, the
cables from the printed circuit board to
the woofer terminals are quite short; it
probably would not work otherwise. The
eight screws should be kept in a safe
place.
8
8
1
1
2
2
3
3
4
4
5
5
6
6
7
7
9
9
10
10
11
11
12
12
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
1
1
Six screws need to be removed from
each side of the front of the grill (twelve
screws total) using the phillips head
screwdriver. This grill has a tendency to
want to “pop” off, so please be sure to
hold it in place with one hand or arm
while removing the screws with your
free hand. In addition to the grill, the
screws also hold the decorative trim. The
trim should be removed, too. Keep the
twelve screws in a safe place.