Filter
Top Products
MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box
7
MVP-WDS Wall Docking Station for MVP Panels
8. Press down on the Security Latch to allow it to go through the top opening.
9. Grasp the top rim of the faceplate and carefully slide it over the cradle (at an angle) until the
faceplate is completely removed from the WDS (FIG. 8).
Once the faceplate has been removed, you can continue the installation of the WDS.
FIG. 7 Faceplate securing latch and connector locations
FIG. 8 Faceplate removal from MVP-WDS
Faceplate Securing Latches
Faceplate Connectors
Faceplate
Faceplate securing latches