AT&T IPH8010 Car Video System User Manual


 
32
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate this equipment.
Safety
This product is intended to be supplied with an approved listed Pace Direct Plug-In AC/DC power
adapter marked Class 2 or LPS and rated 12 V, 1.5 A for all IPH8005 series models.
AC Adapter
This product is intended to be supplied with a listed Pace Direct Plug-In AC/DC Power adapter
marked Class 2 or LPS and rated 12V, 1.5A for IPH8003, IPH8003M, IPH8005, IPH8005M,
IPH8010, IPH8010M, IPH8110 models.
The AC/DC Power adapter supplied with this product is designed to ensure your personal safety
and to be compatible with this equipment.
Please follow these guidelines:
Do not use the adapter in a high moisture environment. Never touch the adapter when your
hands or feet are wet.
Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
Connect the adapter to a proper power source. The voltage and grounding requirements are
found on the product case and/or packaging.
Do not use the adapter if the cord becomes damaged.
Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit
if it is damaged or exposed to excess moisture.
Location – Electrical Considerations
CAUTION: Due to risk of electrical shock or damage, do not use this product near water,
including a bathtub, wash bowl, kitchen sinks or laundry tub, in a wet basement, or near a
swimming pool. Also, avoid using this product during electrical storms. Avoid locations near
electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical
noise (for example, air conditioners, neon signs, high-frequency or magnetic security devices, or
electric motors).
NOTICE TO INSTALLER: The shield of the coaxial cable must be grounded in accordance with
Article 840-101A of the National Electrical Code, NFPA 70, 2011 Edition (or Canadian Electrical
Code - Part 1 where applicable).
Adaptateur secteur
Cet appareil est destiné à être alimenté par une source d'alimentation directe fournie par Pace,
de « Classe 2 » ou marquée « LPS », et avec un courant de sortie de 12VDC, 1.5A pour tous les
modèles IPH8003, IPH8003M, IPH8005, IPH8005M, IPH8010, IPH8010M, IPH8110.
Le bloc d’alimentation secteur fourni avec ce produit a été conçu pour garantir votre sécurité et
être compatible avec cet appareil. Veuillez suivre les consignes suivantes:
N’utilisez pas l’adaptateur secteur dans un environnement hautement humide. Ne touchez
jamais l’adaptateur secteur si vos pieds ou mains sont humides.
Laissez une ventilation adéquate autour de l’adaptateur secteur. Evitez les endroits où la
circulation de l’air est insuffisante.
Branchez l’adaptateur secteur sur une prise respectant les spécifications sur la tension et la
mise à la terre se trouvant sur la coque et/ou l'emballage du produit.