Filter
Top Products
24. PICTURE SELECT Button – Each time this button is pressed, the OSD will display the "adjust-
ment bars" for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is
displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically
turn off if no adjustments are made within 6 seconds, or if any other button is depressed.
25. FMM SOURCE Button – Press this button to switch the FMM Modulator Audio Source to DVD or
AV1.
26. SLOW Button – Press this button to reduced the DVD viewing speed by 1/2, 1/4, 1/8 times of
normal speed.
27. STOP Button
* ( ) – Press this button to stop the playback of the DVD disc.
28. PAUSE Button ( ) – Press this button to pause the playback of the DVD disc.
29. PLAY Button
* ( ) – Press this button to activate the play mode while a disc is loaded into the disc
compartment.
30. A-B REPEAT Button – Press this button to repeat playback of a DVD or CD from point A to point B.
31. REPEAT Button – Press this button to repeat various titles, chapter or tracks of a DVD, CD or
MP3.
32. SETUP Button – Press this button to select the DVD player's options (Display, OSD Language,
Defaults, Parental Control, Password, Exit Setup).
33. ENTER Button – Press this button to implement the setting(s) selected.
34. MUTE Button – Press this button to mute the audio headphones. Pressing the button again will
restore the sound to the previous set level.
35. SOURCE Button
* – The video signals from video equipment connected to the A/V1 or AUX inputs
can be displayed on the monitor by pressing this button. Each time the button is pressed, the
source will change in the following sequence: DVD, AV1 and AUX.
36. NUMBER Buttons – Press these buttons to enter the numbers 0 to 9 for selection of CD tracks,
DVD chapters, and password setting.
37. FM ON/OFF Button – Press this button to turn the FM Modulator power ON/OFF.
38. FM SELECT Button – Press this button to select the FM modulator Frequency (Frequency 1,
88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz).
NOTE: VCP function buttons are for Audiovox VCP'S only.
-6-