Filter
Top Products
-2-
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button 3 so that the “FAD.” indi-
cation appears on the display panel. Within 5 seconds of choos-
ing the Fader mode, press the + or - button of the Level Control
2 to adjust the front-rear speaker balance as desired. The
fader position will be shown on the display panel from “FAD.R
15” (full rear) through “FAD.F 15” (full front). When the level
between the front and rear speakers is equal, “FAD. 0” will be
shown on the display panel. The display will automatically return
to the normal indication 5 seconds after the last adjustment or
when another function is activated.
8 LOUDNESS CONTOUR (LD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the charac-
teristics of human hearing. Press the button to activate this fea-
ture and the indication “LD” will appear on the display panel.
Pressing the button again will deactivate the feature (the “LD”
indication will disappear from the display panel).
9 AUDIO SETTING MEMORIES (P1/P2/P3)
Three pre-set buttons are provided on this unit to store desired
audio level positions into memories which can be easily recalled.
To set any of the 3 audio memories, use the following procedure:
1. Use the Select button 3 and Level control 2 to adjust the
setting of the volume, treble, bass, balance and fader to the
desired positions.
2. Press the Select button 3 to call any of the audio functions
on the display. Within 2 seconds of pressing the Select but-
ton and while the audio function is still on the display panel,
press the + or - button of the Level Control 2 to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of -9 to a maximum of +9 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by press-
ing the Select button 3 so that the “TRE.” indication appears
on the display panel. Within 5 seconds of choosing the Treble
mode, press the + or - button of the Level Control 2 to adjust
the treble response as desired. The treble level will be shown
on the display panel from a minimum of -9 to a maximum of +9
(0 is flat response). The display will automatically return to the
normal indication 5 seconds after the last adjustment or when
another function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button 3 so that the “BAL.” indi-
cation appears on the display panel. Within 5 seconds of choos-
ing the Balance mode, press the + or - button of the Level Con-
trol 2 to adjust the balance as desired. The balance position
will be shown on the display panel from “BAL.L 15” (full left)
through “BAL.R 15” (full right). When the volume level between
the left and right speakers is equal, “BAL. 0” will be shown on
the display panel. The display will automatically return to the
normal indication 5 seconds after the last adjustment or when
another function is activated.