Filter
Top Products
press the pre-set button (1 through 3) to be set and continue
to hold it in. After approximately 2 seconds, the volume will
be momentarily muted and the pre-set number will appear on
the display panel indicating that the audio levels are now set
into that memory position. The settings can be recalled at
any time by pressing the Select button 3 and then that pre-
set button within 2 seconds.
bl AM/FM BAND SELECTOR (BAND)
Each time this button is pressed, the radio band is changed. The
indication “AM1, “AM2”, “FM1”, “FM2”, or “FM3” will appear on
the display panel according to your selection.
Pressing this button will also change back to radio reception dur-
ing cassette or CD changer play.
bm MANUAL UP/DOWN TUNING ( / )
AUTOMATIC SEEK TUNING
To manually select a radio station, tap the Up Tuning ( ) button
to advance one frequency step higher or the Down Tuning ( )
button to tune downward until the desired frequency is reached.
Pressing either button for longer than 0.5 seconds and then re-
leasing will activate the Automatic Seek Tuning function in the
selected direction as indicated by the “UP” or “dO” (down) indi-
cation on the display panel. The radio will seek the next avail-
able station and stop at that frequency. The Seek function can
be stopped by pressing the button again or activating any other
tuning function.
Pressing either button for longer than 0.5 seconds will cause the
radio to continue tuning rapidly in the selected direction until the
button is released, at which point it will seek to the next available
station.
-3-
bn AUTOMATIC SCAN TUNING (SCN)
During radio operation, press this button to scan stations, stop-
ping at each station for 5 seconds before continuing to the next
station (the frequency will flash during this time). When a de-
sired station is reached, press the button again to stop the Scan
function and remain on the selected frequency. The Scan func-
tion can be stopped at any time by pressing the button again or
activating any other tuning function.
bo AUTO-ST ORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily to scan
the 6 stations pre-set into the memories of that band. The unit
will stop at each pre-set station for 5 seconds before continuing
to the next pre-set station. Press the button again momentarily
to stop Pre-Set Scan operation and remain on the selected fre-
quency.
Pressing the button for longer than 2 seconds will activate the
Auto-Store T uning feature which will automatically scan the band
and enter up to 6 strong stations into the 6 pre-set memories
(the indication “AST” will appear on the display panel to show
that Auto-Store Tuning is in progress). After entering the sta-
tions into the memories, the unit will automatically stop at each
station for 5 seconds so each can be heard. If you have already
set the pre-set memories to your favorite stations, activating the
Auto-Store feature will erase those stations and enter the new
strong stations. This feature is most useful when travelling in a
new area where you are not familiar with the local stations.