Blaupunkt 7 644 250 310 Car Stereo System User Manual


 
73
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
briefly press the 5 RPT button ;.
“REPEAT TRACK” appears briefly and
RPT lights up in the display.
To repeat the current CD,
press the 5 RPT button ; again.
“REPEAT CD” appears briefly and RPT
lights up in the display.
Cancelling REPEAT
To stop the current track or current CD
from being repeated,
repeatedly press button 5 RPT ;
until “REPEAT OFF” appears in the
display and RPT disappears.
Random track play (MIX)
To play the tracks on the current CD in
random order,
briefly press the 4 MIX button ;.
“MIX CD” appears briefly and MIX lights
up in the display.
To play the tracks on all inserted CDs in
random order,
press the 4 MIX button ; again.
“MIX ALL” appears briefly and MIX lights
up in the display.
Cancelling MIX
Briefly and repeatedly press the 4
MIX button ; until “MIX OFF” ap-
pears in the display and MIX disap-
pears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending order,
press and hold down the OK but-
ton : for longer than two sec-
onds.
“SCAN” and the selected display mode
appear alternately in the display.
Stopping SCAN
To stop scanning,
briefly press the OK button :.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
Press the 6 button ;.
“PAUSE” appears in the display.
Cancelling pause
Press the 6 button ; while in
pause mode.
Playback is resumed.
CD CHANGER MODE