Filter
Top Products
45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “SENS” appears in the
display.
➮ Press the button 7.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9 or the
OK button :.
Note:
● You can set different sensitivity lev-
els for FM and MW or LW (AM).
Storing stations
Storing stations manually
➮ Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
➮ Tune into the station that you want.
➮ Press and hold down one of the
station buttons 1 - 3 6 or 4 - 6 ;
for longer than two seconds to as-
sign the station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
● Any stations that were previously
stored in this memory bank are de-
leted in the process.
➮ Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. “FM T-
STORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
RADIO MODE