Filter
Top Products
46
Listening to stored stations
➮ Select the memory bank or wave-
band.
➮ Press the station button 1 - 3 6 or
4 - 6 ; that the station you want
to listen to is assigned to.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
play all the receivable stations. You can
set the scanning time in the menu to
between 5 and 30 seconds.
Starting SCAN
➮ Press and hold down the OK but-
ton : for longer than two sec-
onds.
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮ Press the OK button :.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “SCAN TIME” appears in
the display.
➮ Set the scanning time that you
want using the buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9 twice or
the OK button : twice.
Note:
● The scanning time that you set is
also applied by the system to scan-
ning carried out in CD/MP3 and
CD-changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your car radio can
receive and display this information.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
You can use the PTY function to select
stations of a particular programme type.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Note:
● If the tuner does not find a station
that corresponds to the selected
programme type, you will hear a
beep and “NO PTY” appears briefly
in the display. The radio will then
retune to the station that it received
last.
RADIO MODE