Blaupunkt 7 644 260 310 Car Stereo System User Manual


 
50
Note:
If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 1 in order to
start playing the CD.
If a CD is already inserted in the
drive,
press the SRC button @ repeated-
ly until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
Press one of the arrow buttons 7
to select the next or previous track.
If you press the
or button 7 once,
the player will play the current track
again from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
press and hold down one of the /
buttons 7 until fast-reverse /
fast-forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons 7 until fast searching
backwards / forwards begins.
Random track play (MIX)
Press the 4 MIX button ;.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
Press the 4 MIX button ; again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can briefly play all the tracks on the
CD.
Press and hold down the OK but-
ton : for longer than two sec-
onds. The next track will then be
played briefly.
Note:
You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Stopping SCAN and continuing
listening to a track
To stop scanning, press the OK
button :.
The currently scanned track will then
continue to be played normally.
CD MODE